Fenix BT30R Bike Light
Maximum output of 1800 lumens. Powered by BA2B Rechargeable Battery (included).
The Fenix BT30R Bike Light has a maximum brightness of 1800 lumens from the Cree XM-L2 T6 LED & is powered by the Fenix BA2B Rechargeable Battery which is included.
The fully adjustable O-ring mounting system enables accurate beam placement and quick attachment / detachment of the light, whilst the separate plug-in BA2B battery pack offers compatibility with the Fenix BA4C battery case (available as a spare part) which means you can carry a spare battery pack containing either 4 x CR123 batteries or 2 x 18650 Li-ion rechargeable cells at very reasonable cost.
The instant turbo setting is activated with the remote pressue switch. If the light is off, pushing the remote switch will engage the 1800 lumen brightness until the switch button is released. If the light is on when the turbo setting is selected, the highest brightness that the power can support will activate until the button is released.
So as not to shine in the eyes of pedestrians, the upward beam of the bike light is refracted to the ground.
Brightness Levels:
Burst Mode: 1800 Lumens
High: 1200 Lumens - 1 hour 50 minute runtime
Mid: 500 Lumens - 5 hour 15 minute runtime
Low: 200 Lumens - 12 hour 50 minute runtime
Eco Mode: 100 Lumens - 22 hour 35 minute runtime
Flashing Mode: 200 Lumens
Beam distance of up to 170 meters, waterproof to IPX-6 & impact resistant to drops from 1 meter.
Operation
- Press and hold the power button for 0.8 seconds to turn the light on and off.
- Single press the power button to cycle through the outputs, in order Eco-Low-Mid-High.
- Double press the power button to enter Flashing mode.
Includes: BA2B Battery Pack with velcro attachment strap, charger with choice of UK & USA & European adapters for the BA2B battery pack, extension cable if you wish the light & battery pack to be further apart, 2 large & 2 medium & 2 small O-ring mounting straps.
- Batteries: Removeable rechargeable batteries
- Additional Battery Type: Also accepts Fenix BA4C battery case
- Lamp Type: 2 x Cree XM-L2 T6 neutral white LED
- Output/Runtime: Turbo: 1800 lumens, High: 1200 lumens (1h 50min), Mid: 500 lumens (5h 15min), Low: 200 lumens (12h 50min), Eco: 100 lumens (22h 35min), Flashing: 200 lumens
- Strobe/SOS: Flash
- Reflector: Aspherical reflector with a wide beam angle
- Lens Type: Anti-glare lens design produces safe dual-distance beam illumination
- Switch Type: Push button on / off / mode switch plus remote burst switch
- Construction: Made from aluminium alloy
- Finish: Type III HA
- Tail Stand: No
- Pocket Clip: No
- Waterproofing: IPX-6, Waterproof
- Dimensions: Headlight: 74mm (Length) x 50.6mm (Width) x 43.5mm (Height), Battery Pack: 87mm (Length) x 59mm (Width) x 37mm (Height)
- Weight: Headlight: 154g, Battery Pack: 168g
- Further Info: The large O-ring mounting straps are sized for 30mm-35mm, while the medium ones for 24mm-30mm and the small ones for 20mm-24mm (sizes are for reference only)
- Power Levels: 4 plus burst and flashing mode
